Half Tiled Width Measurement

Half Tiled Width Measurement

Half Tiled Width Measurement

I have a window that is half tiled, which width measurement do I take?

If it is a Roller Blind you are ordering and the depth of the tiled step is no more than 10mm each side then measure at the top of the window and order as INSIDE MOUNT (RECESS) this is possible because with a Roller Blind on the pin end side the fabric is set back from the end of the barrel by approx 12mm and the controller end the fabric is set back approx 25mm from the end of the barrel. The same would apply if it is a Vertical Blind, but all other blinds you must measure the narrowest width, so across the width on the tiles and order as INSIDE MOUNT (RECESS).